Configuring Security Features
669
To change the administrator password via phone user interface:
1. Tap Settings->Advanced (default password: admin) ->Set Password.
2. Enter the current administrator password in the Current PWD field.
3. Enter new password in the New PWD field and Confirm PWD field.
Valid characters are ASCII characters 32-126(0x20-0x7E).
4. Tap to accept the change.
Auto-Logout Time
Auto-logout time defines a specific period of time during which the IP phones will automatically
log out if you have not performed any actions via web user interface. Once logging out, you
must re-enter username and password for web access authentication.
Procedure
Auto-logout time can be configured using the following methods.
Central Provisioning
(Configuration File)
Configure auto-logout time.
Parameter:
features.relog_offtime
Configure auto-logout time.
Navigate to:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-general&q
=load
Details of the Configuration Parameter:
Description:
Configures the timeout interval (in minutes) for web access authentication.
Example:
features.relog_offtime = 5
If you log into the web user interface and leave it for 5 minutes, it will automatically log out.
Web User Interface:
Features->General Information->Auto-Logout Time(1~1000min)
Phone User Interface:
To Next Page
Loading...
Need help?
General
