Yealink SIP-T58V/A User Manual

Administrator’s Guide for SIP-T5 Series Smart Media Phones
14
Power over Ethernet (PoE)
With the included or a regular Ethernet cable, IP phones can be powered from a PoE-compliant
switch or hub.
To connect the PoE:
1) Connect the Ethernet cable between the Internet port on the IP phone and an available port
on the in-line power switch/hub.
For SIP-T58V/A:
For SIP-T56A:
Note
If in-line power switch/hub is provided, you don’t need to connect the phone to the power
adapter. Make sure the switch/hub is PoE-compliant.
The IP phone can also share the network with another network device such as a PC (personal
computer). It is an optional connection. We recommend that you use the Ethernet cable provided
by Yealink.
Important! Do not unplug or remove the power while the IP phone is updating firmware and
configurations.

Yealink SIP-T58V/A Specifications

General

Brand	Yealink
Model	SIP-T58V/A
Category	IP Phone
Language	English