ZOLL R Series Service Manual

R Series Service Manual
5-6 9650-0903-01 Rev. L
P/D Settings
The software attempts to establish a P/D setting that reflects an estimate of the battery ESR. This is to avoid shutdown due to loading of the DC bus. Tables
have been prepared on the basis of nominal R Series operating conditions without the printer operating. We will rely on the defib module throttling to
handle additional load conditions (such as printer).
WiFi
The R Series offers the option for WiFi data transmission of the full disclosure file (ECG waveforms, SpO
2
values, etc.), device check file (self test
results), and activity log file. This is accomplished with an IEEE 802.11abgn Wi-Fi compact flash card that is inserted into the existing compact flash I/O
port. Full disclosure transmissions can be sent (when properly configured) to a database management system called CodeNet Central that resides on a
desktop or laptop computer. Device check and activity log transmissions will be sent to a ZOLL Data Systems application called Defib Dash Board.
CodeNet Central is developed by ZOLL Data Systems.

ZOLL R Series Specifications

General

Defibrillator Type	Manual and AED
Pacing	Yes
ECG Monitoring	Yes
SpO2 Monitoring	Yes
FAST-SpO2	Yes
IP Rating	IP55
Defibrillator Waveform	Biphasic
Energy Levels	1-360 Joules
Display	LCD
Pacer Type	Demand
Pacer Rate	30-180 ppm
Pacer Output	0 – 140 mA
EtCO2 Monitoring	Optional
NIBP Monitoring	Optional
Temperature Monitoring	Optional
Printer	Integrated
Battery Type	Lithium-ion
CPR Feedback	Yes
Data Storage	Internal memory
Connectivity	USB