Name: ZOLL R Series
Brand: ZOLL
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Transferring a Full Disclosure File to a Compact Flash Card

9650-0912-01 Rev. N ZOLL R Series Operator’s Guide 11–3

To remove a compact flash card:

Press the release button and pull the card out of the slot.

Figure 11-2. Removing a Compact Flash Card

Transferring a Full Disclosure File to a Compact Flash

Card

Make sure that a compact flash card is installed in the slot on the left side of the device.

To transfer data to a compact flash card:

1. Turn the Mode Selector to MONITOR.

2. Press the Report Data softkey.

3. Press the Transfer Mode softkey.

4. Press the Report to Card softkey.

The message TRANSFERRING DATA is displayed. All data is transferred to the installed CF

data card.

Note: Do not remove the CF card while files are transferring. Corruption may result on the

data card.

When all files are transferred, the message DATA TRANSFERRED is displayed. You can now

remove the CF card from the R Series unit.

To exit Data Transfer mode, press the Exit Transfer softkey.

Transferring Device Check and Activity Log Files to a

Compact Flash Card

Make sure that a compact flash card is installed in the slot on the left side of the device.

To copy the Code Readiness Log to a CF card:

1. Turn the mode selector to MONITOR.

Other manuals for ZOLL R Series

Questions and Answers:

Need help?

Do you have a question about the ZOLL R Series and is the answer not in the manual?

General