Name: ZOLL R Series
Brand: ZOLL
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Monitoring Electrodes Attachment

9650-0904-01 Rev. N ZOLL R Series Operator’s Guide 10–3

Note: Lead sets and lead cables are different accessories and are not interchangeable. For

5-lead monitoring, use a 5-lead cable.

Note: 3-lead cables are available with and without Electro Surgical Unit noise suppression. If

the R Series unit is being used in the presence of an ESU, ablation device, or any other

high electromagnetic noise emitting source, ZOLL recommends using the R Series

3-Lead ECG Cable, ESU Filtered (REF 9500-000693) specifically designed to limit

ESU artifact when monitoring heart rates.

Monitoring Electrodes Attachment

Attach snap-on leads to electrodes and check for good contact between the electrode and the

lead termination.

If you are using a 3-lead set, connect the end of the 3-lead set to a OneStep Pacing cable.

Note: The 3-lead set is a standard option with R Series Plus models.

Peel the protective backing from the ECG electrode. Be careful to keep adhesive surface free of

electrolyte gel.

3-lead configuration 5-lead wire configuration

RA LA

3-lead set 5-lead cable

3-lead cable

OneStep Pacing cable

3-lead set

connection complete

Other manuals for ZOLL R Series

Questions and Answers:

Need help?

Do you have a question about the ZOLL R Series and is the answer not in the manual?

General