ZOLL R Series Service Manual

Defibrillator Controls and Indicators
9650-0904-01 Rev. N ZOLL R Series Operator’s Guide 2–7
Figure 2-3. R Series Display Screen (shown in manual mode with optional SpO
2
, NIBP and
CO
2
monitoring)
Color coding
To differentiate information for various parameters, the unit displays each type of information
in a specific user-configurable color.
Messages
During operation, a fault or error message is displayed when a fault is detected. If this occurs,
turn the unit off and then on and recheck operation. If the fault persists, contact your authorized
ZOLL agent as described on page 1-22.
Options Param
Code
Marker
Report
Data
Alarms
11:24
72
ECG
I
x1
SpO2%
0:00
IDLE
Depth
Rate
99
NIBP
mmHg
CO2
mmHg
35
13
RR
Ɔ
Sync
On/Off
II
III
I
120
80
100
CPR 1:51
CPR
PPI
Heart rate
(beats per minute)
Softkey labels
ECG
• size
• selected lead
• alarm indicator
Elapsed time
Mode/Messages
Trace 1
Trace 2
Trace 3
SpO
2
values and
alarm indicator
(optional)
Perfusion
Performance Indicator
Messages
CPR
Idle
Time
Rate and Depth Indicators
• heartbeat indicator
(R Series Plus Only)
Remaining CPR
Timer
NIBP values and
alarm indicator
(optional)
CO
2
values and
alarm indicator
(optional)

ZOLL R Series Specifications

General

Defibrillator Type	Manual and AED
Pacing	Yes
ECG Monitoring	Yes
SpO2 Monitoring	Yes
FAST-SpO2	Yes
IP Rating	IP55
Defibrillator Waveform	Biphasic
Energy Levels	1-360 Joules
Display	LCD
Pacer Type	Demand
Pacer Rate	30-180 ppm
Pacer Output	0 – 140 mA
EtCO2 Monitoring	Optional
NIBP Monitoring	Optional
Temperature Monitoring	Optional
Printer	Integrated
Battery Type	Lithium-ion
CPR Feedback	Yes
Data Storage	Internal memory
Connectivity	USB