ZOLL R Series Service Manual

R Series Service Manual
3-26 9650-0903-01 Rev. L
7. In applicable, disconnect the EtCO2 cable from the
parameter power supply by pushing down on
connector latch.
8. Carefully pull the brick assembly out slightly through
the front; disconnect the SpO
2
connector cable.

ZOLL R Series Specifications

General

Defibrillator Type	Manual and AED
Pacing	Yes
ECG Monitoring	Yes
SpO2 Monitoring	Yes
FAST-SpO2	Yes
IP Rating	IP55
Defibrillator Waveform	Biphasic
Energy Levels	1-360 Joules
Display	LCD
Pacer Type	Demand
Pacer Rate	30-180 ppm
Pacer Output	0 – 140 mA
EtCO2 Monitoring	Optional
NIBP Monitoring	Optional
Temperature Monitoring	Optional
Printer	Integrated
Battery Type	Lithium-ion
CPR Feedback	Yes
Data Storage	Internal memory
Connectivity	USB