ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual (Volume I)
86 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 84 SHOW FDB MAC COMMAND
Format Mode Function
show fdb mac
<xx. xx. xx.
xx. xx. xx>
Global
config
This displays the MAC-based fdb
information
Result: This displays the MAC-based fdb information.
8. To display the port-based fdb information, use command
show fdb port <portname> {detail} in global
configuration mode. This is shown in
Table 85.
TABLE 85 SHOW FDB PORT COMMAND
Format Mode Function
show fdb port
<portname>
{detail}
Global
config
This displays the port-based fdb
information
Result: This displays the port-based fdb information.
9. To display Trunk fdb information, use command show
fdb trunk <trunkname> [detail]in global configuration
mode. This is shown in
Table 86.
TABLE 86 SHOW FDB TRUNK COMMAND
Format Mode Function
show fdb trunk
<trunkname>
{detail}
Global
config
This displays Trunk fdb information
Result: This displays Trunk fdb information.
10. To display the VLAN-based fdb information, use
command show fdb vlan <vlanname> [detail]in global
configuration mode. This is shown in
Table 87.
TABLE 87 SHOW FDB VLAN COMMAND
Format Mode
This displays VLAN-based fdb
information
Result: This displays VLAN-based fdb information.
E
ND OF STEPS
FDB is configured on the switch.
LACP Overview
Link Aggregation Control Protocol (LACP) follows IEEE 802. 3ad
standards.
Result
LACP