Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 103
TABLE 125 IPTV CONTROL PRVTIME COMMAND
Format Mode Function
iptv control
prvtime
nas
config
mode
This sets the max preview time of
global
Result: This sets the max preview time of global.
5. To set the period of global reset preview counts, use
command iptv control prvcount reset-period in nas config
mode. This is shown in
Table 126.
TABLE 126 IPTV CONTROL PRVCOUNT RESET-PERIOD COMMAND
Format Mode Function
iptv control
prvcount
reset-period
nas
config
mode
This sets the period of global reset
preview counts
Result: This sets the period of global reset preview counts.
6. To enable/disable IPTV, use command iptv control
{enable|disable} in nas config mode. This is shown in
Table 127.
TABLE 127 IPTV CONTROL COMMAND
Format Mode Function
iptv control
{enable|disable}
nas
config
mode
This enable/disable IPTV
Result: This enable/disable IPTV.
E
ND OF STEPS
IPTV has been configured.
Configuring IPTV Channels
This topic describes the configuration of IPTV channels.
For the configuration of IPTV channels, perform the following
steps.
1. To create channels of IPTV, use command create iptv
channel <channellist> in nas config mode. This is shown
in
Table 128.
TABLE 128 CREATE IPTV CHANNEL COMMAND
Format Mode Function
create iptv
channel
Nas config mode This creates
channels of IPTV
Result
Purpose
Steps