EasyManua.ls Logo

Zte ZXR10 2928 - Introduction to FDB; MAC Table Operations

Zte ZXR10 2928
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 69
TABLE 37 DUPLEX COMMAND
Format Mode Function
set port
<portlist> auto
{enable|disable}
Global
config
This sets the port auto.
Result: This sets the port auto.
5. To set the port speedadvertise, use command set port
<portlist>speedadvertise{maxspeed|speed10|speed10
0|speed1000} in global configuration mode. This is
shown in
Table 38.
TABLE 38 SPEED COMMAND
Format Mode Function
set <portlist> speedadvertise
{maxspeed|speed10|speed100|speed1000}
Global
config
This sets
speed of
the port.
Result: This sets speed of the port.
6. To set the working manner of the port, use command set
port <portlist> duplex {full|half}.
Format Mode Function
set port
<portlist>
duplex
{full|half}
Global
config
This sets the working manner of
the port.
7. To set the speed of the port, use command set port
<portlist> speed {10|100|1000}.
Table 39 Set Port speed Commands
Format Mode Function
set port
<portlist> speed
{10|100|1000}}
Global
config
This sets port's speed.
Result: This sets port’s speed.
8. To set port <portlist> queue-schedule, use command set
port <portlist> queue-schedule { WRR0 |SP |WRR1-
SP|WRR2-SP}.
Table 40 Set port queue-schedule command

Table of Contents

Related product manuals