ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual (Volume I)
156 Confidential and Proprietary Information of ZTE CORPORATION
D> [<1-15>]in router config mode. This is shown in Table
250.
TABLE 252 ARP IPPORT TIMEOUT COMMAND
Format Mode Function
Add iproute {<A.
B. C. D/M>|<A.
B. C. D> <A. B.
C. D>} <A. B.
C. D> [<1-15>]
router config This sets ARP table
entry aging time of
the IP port
Result: This adds the iproute.
7. To view ARP table entries, use command show arp
[static|dynamic|invalid|ipport<0-63>
static|dynamic|invalid} |ipaddress <A. B. C. D>] in
router config mode. This is shown in
Table 253.
TABLE 253 SHOW ARP COMMAND
Format Mode Function
show arp
[static|dynamic|invalid|ipport<0-
63> static|dynamic|invalid}
|ipaddress <A. B. C. D>]
router
config
This views
ARP table
entries
Result: This views ARP table entries.
8. To view ARP info, use command show arp
[static|dynamic|invalid|ipport <0-63>
[static|dynamic|invalid] |ipaddress <A. B. C. D>] in
router config mode. This is shown in
Table 253.
TABLE 254 SHOW ARP COMMAND
Format Mode Function
show arp
[static|dynamic|invalid|ipport
<0-63>
[static|dynamic|invalid]
|ipaddress <A. B. C. D>]
router config
This views
ARP table
entries
Result: This views ARP info.
9. To view ipport, use command show ipport [<0-63>] in
router config mode. This is shown in
Table 253.
TABLE 255 SHOW ARP COMMAND
Format Mode Function
show ipport [<0-
63>]
router config This views ARP
table entries
Result: This views ipport.