ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual (Volume I)
254 Confidential and Proprietary Information of ZTE CORPORATION
2. To switch from a member switch to command switch,
use command rlogin commander in privileged mode. This
is shown in
Table 420.
TABLE 420 RLOGIN COMMANDER COMMAND
Format Mode Function
rlogin
commander
privileged mode This switches from
a member switch to
command switch
Result: This switches from a member switch to command
switch.
3. To download/upload versions through TFTP on command
switch, use command tftp commander
{download|upload} <name> in privileged mode. This is
shown in
Table 421.
TABLE 421 TFTP COMMANDER COMMAND
Format Mode Function
tftp commander
{download|upload}
<name>
privileged mode This
download/upload
version through
TFTP on command
switch
Result: This download/upload version through TFTP on
command switch.
4. To save configuration of specified member switch, use
command save member {<idlist>|all} in privileged mode.
This is shown in
Table 422.
TABLE 422 SAVE MEMBER COMMAND
Format Mode Function
save member
{<idlist>|all}
privileged mode This saves
configuration of
specified member
switch
Result: This saves configuration of specified member switch.
5. To delete configuration of specified member switch, use
command erase member {<idlist>|all} in privileged mode.
This is shown in
Table 423.
TABLE 423 ERASE MEMBER COMMAND
Format Mode Function
erase member
{<idlist>|all}
privileged mode This deletes
configuration of