Zte ZXR10 2928 User Manual

Chapter 8 Access Service
Confidential and Proprietary Information of ZTE CORPORATION 213
TABLE 357 SET ZESR DOMAIN VLAN COMMAND
Format Mode Function
set zesr domain
<domainId> add
control_vlan
<vlanname>
global config This adds VLAN in
ZESR domain
Result: This adds VLAN in ZESR domain.
Note: Add control VLAN in ZESR domain, and ports
configured in ring should be added into control VLAN and set
as Tagged. Control VLAN is opened by users. ZESR
function can not be enabled if control VLAN is not enabled.
7. To add protect VLAN in ZESR domain, use command set
zesr domain <domainId> add protect_vlan <vlanlist> in
global configuration mode. This is shown in
Table 358.
TABLE 358 SET ZESR DOMAIN ADD PROTECT VLAN COMMAND
Format Mode Function
set zesr domain
<domainId> add
protect_vlan
<vlanlist>
global config This add protect
VLAN in ZESR
domain
Result: This add protect VLAN in ZESR domain.
Note: Add protect VLAN in ZESR domain. Protect VLAN is
the user data VLAN in the domains.
8. To delete control VLAN in ZESR domain, use command
set zesr domain <domainId> delete control_vlan
<vlanname>in global configuration mode. This is shown in
Table 359.
TABLE 359 SET ZESR DOMAIN ‘DELETE COMMAND
Format Mode Function
set zesr domain
<domainId> delete
control_vlan
<vlanname>
global config This deletes control
VLAN in ZESR
domain
Result: This deletes control VLAN in ZESR domain.
9. To delete protect VLAN in ZESR domain, use command
set zesr domain <domainId> delete protect_vlan
<vlanlist> in global configuration mode. This is shown in
Table 360.

Zte ZXR10 2928 Specifications

General

MAC Address Table Size	16K
VLAN	4K
Jumbo Frame	9K
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	< 30W
Dimensions	440mm x 200mm x 44mm
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Ports	24 x 10/100/1000Base-T ports, 4 x GE SFP ports