EasyManua.ls Logo

Zte ZXR10 2928 - MSTP Mode

Zte ZXR10 2928
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual Volume I
96 Confidential and Proprietary Information of ZTE CORPORATION
group <A. B. C. D> [port <portlist>| trunk <trunklist>]
in global configuration mode. This is shown in
Table 108.
TABLE 110 SET IGMP SNOOPING VLAN DELETE GROUP PORT COMMAND
Format Mode Function
set igmp
snooping vlan
<1-4094>
delete group
<A. B. C.
D>[ port
<portlist>|
trunk
<trunklist>]
Global
config
This unbinds static multicast group
from a VLAN
Result: This unbinds static multicast group from a VLAN.
17. To add maximum multicast group numbers to Vlan, use
command set igmp snooping add maxnum <1-256> vlan
<vlanlist> in global configuration mode. This is shown in
Table 111.
TABLE 111 SET IGMP SNOOPING ADD MAXNUM VLAN COMMAND
Format Mode Function
set igmp
snooping add
maxnum <1-
256> vlan
<vlanlist>
Global
config
This adds maximum multicast
group numbers to Vlan
Result: This adds maximum multicast group numbers to
Vlan.
18. To delete maximum multicast group number from Vlan,
use command set igmp snooping delete maxnum vlan
<vlanlist> in global configuration mode. This is shown in
Table 112.
TABLE 112 SET IGMP SNOOPING DELETE MAXNUM VLAN COMMAND
Format Mode Function
set igmp
snooping
delete
maxnum vlan
<vlanlist>
Global
config
This deletes maximum multicast
group number from Vlan
Result: This deletes maximum multicast group number from
Vlan.
4. To Enable/Disable the IGMP filter, use command set
igmp filter {enable|disable} in global configuration mode.
This is shown in
Table 113.

Table of Contents

Related product manuals