EasyManua.ls Logo

Zte ZXR10 2928 - Table 259 AAA Control Port Multiple Host Command; Table 260 AAA Control Port Max Hosts Command; Table 261 Dot1 X Re-Authentication Command

Zte ZXR10 2928
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual Volume I
164 Confidential and Proprietary Information of ZTE CORPORATION
TABLE 259 AAA CONTROL PORT MULTIPLE HOST COMMAND
Format Mode Function
aaa-control port
<portlist>
multiple-hosts
{enable|disable}
nas config This
allows/prohibits
multi-subscriber
access of the port
Result: This allows/prohibits multi-subscriber access of the
port.
4. To set the maximum number of subscribers connected
through the port, use command aaa-control port
<portlist> max-hosts <0-64> in nas config mode. This is
shown in
Table 260.
TABLE 260 AAA CONTROL PORT MAX HOSTS COMMAND
Format Mode Function
aaa-control port
<portlist> max-
hosts <0-64>
nas config This set the
maximum number
of subscribers
connected through
port
Result: This sets the maximum number of subscribers
connected through port.
Note: A port can allow access of multiple subscribers and
each subscriber has own independent authentication and
billing processes. The aaa-control port max-hosts
command is valid only when the port allows access of
multiple subscribers.
5. To enable/disable re-authentication mechanism, use
command dot1x re-authenticate {enable|disable} in nas
config mode. This is shown in
Table 261.
TABLE 261 DOT1X RE -AUTHENTICATION COMMAND
Format Mode Function
dot1x re-
authenticate
{enable|disable}
nas config This enable/disable
re-authentication
mechanism
Result: This enable/disable re-authentication mechanism.
6. To set the re-authentication interval, use command
dot1x re-authenticate period <1-4294967295> in nas
config mode. This is shown in
Table 262.

Table of Contents

Related product manuals