EasyManua.ls Logo

Zte ZXR10 2928 - Table 334 Set Dhcp Option82 Command; Table 335 Set Dhcp Option82 Sub-Option Command; Table 336 Set Dhcp Option82 Command

Zte ZXR10 2928
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZXR10 2920/2928/2952
(V1.0) Access Switch User Manual Volume I
200 Confidential and Proprietary Information of ZTE CORPORATION
<portlist> in global configuration mode. This is shown in
Table 334.
TABLE 334 SET DHCP OPTION82 COMMAND
Format Mode Function
set dhcp option82
{add|delete} port
<portlist>
global config This enable/disable
Option82 function
based on port
Result: This enable/disable Option82 function based on port.
Note: Option82 function is disabled by default. Command
is to enable/disable Option82 function on port. When global
DHCP function is enable then this function is enabled.
3. To enable/disable DHCP Option82 Circuit_ID sub-option
based on port, use command set dhcp option82 sub-
option port <portname> circuit-ID {on |{cisco|china-
tel|dsl-forum}|off} in global configuration mode. This is
shown in
Table 335.
TABLE 335 SET DHCP OPTION82 SUB-OPTION COMMAND
Format Mode Function
set dhcp option82
sub-option port
<portname>
circuit-ID {on
|{cisco|china-
tel|dsl-
forum}|off}
global config This enable/disable
DHCP Option82
Circuit_ID sub-
option based on
port
Result: This enable/disable DHCP Option82 Circuit_ID sub-
option based on port.
Important! ZXR10 2920/2928/2952 supports three forms of
Circuit_ID sub-option: Cisco form, CHINA-TEL form and
DSL-Forum form.
4. To enable/disable DHCP Option82 Subscriber_ID sub-
option based on port, use command set dhcp option82
sub-option port <portname> Subscriber-ID {on
<string>|off} in global configuration mode. This is shown
in
Table 336.
TABLE 336 SET DHCP OPTION82 COMMAND
Format Mode Function
set dhcp option82
sub-option port
<portname>
Subscriber-ID
{on <string>|off}
global config This enable/disable
DHCP Option82
Subscriber_ID sub-
option based on
port
Result: This enable/disable DHCP Option82 Subscriber_ID
sub-option based on port.

Table of Contents

Related product manuals