Zte ZXR10 2928 User Manual

Chapter 8 Access Service
Confidential and Proprietary Information of ZTE CORPORATION 173
TABLE 282 RADIUS ISP DESCRIPTION COMMAND
Format Mode Function
radius isp
<ispname>
description
<string>
nas config This configures
domain description
Result: This configures domain description.
11. Configuration of RADIUS parameters:
i. To set server response timeout time, use command
radius timeout <1-255> in nas config mode. This is
shown in
Table 283.
TABLE 283 RADIUS TIMEOUT COMMAND
Format Mode Function
radius timeout
<1-255>
nas config This sets server
response
Result: This sets server response.
ii. To set number of retransmissions upon server
response timeout, use command radius retransmit <1-
255> in nas config mode. This is shown in
Table 284.
TABLE 284 RADIUS RETRANSMIT COMMAND
Format Mode Function
radius retransmit
<1-255>
nas config This sets number of
retransmission
upon server
response timeout
Result: This sets number of retransmission upon server
response timeout.
iii. To set NAS server name, use command radius
nasname <nasname> in nas config mode. This is
shown in
Table 285.
TABLE 285 RADIUS NASNAME COMMAND
Format Mode Function
radius nasname
<nasname>
nas config This sets NAS
server name
Result: This sets NAS server name.
12. To Enable/Disable billing function of port, use command
aaa-control port <portlist> accounting {enable|disable}
in nas config mode. This is shown in
Table 286.

Zte ZXR10 2928 Specifications

General

MAC Address Table Size	16K
VLAN	4K
Jumbo Frame	9K
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	< 30W
Dimensions	440mm x 200mm x 44mm
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Ports	24 x 10/100/1000Base-T ports, 4 x GE SFP ports