Zte ZXR10 2928 User Manual

Chapter 9 Network Management
Confidential and Proprietary Information of ZTE CORPORATION 265
FIGURE 46 SYSTEM CONFIGURATION
Detail of system configuration is given in
Table 428.
TABLE 428 SYSTEM CONFIGURATION DETAIL
Parameters Detail
Version Number Versin number detail
Switch Type Type of switch
Version Make Time When version is made
Mac Address Hardware address of the switch
Host Name System name
Sys Location System location
Sys Up Time Time the system has run since its start up
2. Host name and Sys location is change by clicking on it.
Name and address is typed in columns.
3. Click Apply.
Result: Host name and address is changed.
E
ND OF STEPS
Structure of switch has been configured.
Configuring Port and Parameters
This topic describes the port status and parameters.
For port status, perform following steps.
Result
Purpose
Steps

Zte ZXR10 2928 Specifications

General

MAC Address Table Size	16K
VLAN	4K
Jumbo Frame	9K
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	< 30W
Dimensions	440mm x 200mm x 44mm
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 95% non-condensing
Ports	24 x 10/100/1000Base-T ports, 4 x GE SFP ports