EasyManua.ls Logo

Zte ZXR10 2928 - Table 66 Set Port Pvid Command; Table 67 Set Trunk Pvid Command; Table 68 Set Vlan Command; Table 69 Set Vlan Add Port Command

Zte ZXR10 2928
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 79
Result: This creates a VLAN name.
3. To set port PVID, use command set port <portlist> pvid
<1-4094> in global configuration mode. This is shown in
Table 66.
TABLE 66 SET PORT PVID COMMAND
Format Mode Function
set port
<portlist> pvid
<1-4094>
Global
config
This sets port PVID
Result: This sets port PVID.
4. To set trunk PVID, use command set trunk < trunklist >
pvid <1-4094> in global configuration mode. This is
shown in
Table 67.
TABLE 67 SET TRUNK PVID COMMAND
Format Mode Function
set trunk <
trunklist > pvid
<1-4094>
Global
config
This sets trunk PVID
Result: This sets trunk PVID.
5. To Enable/Disable the VLAN, use command set vlan
<vlanlist> {enable|disable} in global configuration mode.
This is shown in
Table 68.
TABLE 68 SET VLAN COMMAND
Format Mode Function
set vlan
<vlanlist>
{enable|disable}
Global
config
This Enable/Disable the VLAN
Result: This Enable/Disable the VLAN.
6. To add a specified port to the VLAN, use command set vlan
<vlanlist> add port <portlist> [tag|untag] in global
configuration mode. This is shown in
Table 69.
TABLE 69 SET VLAN ADD PORT COMMAND
Format Mode Function
set vlan
<vlanlist> add
port <portlist>
[tag|untag]
Global
config
This adds a specified port to the
VLAN
Result: This adds a specified port to the VLAN.

Table of Contents

Related product manuals