EasyManua.ls Logo

Zte ZXR10 2928 - Configuring Global ACL; Table 194 Config ACL Hybrid Command; Table 195 Rule Command

Zte ZXR10 2928
341 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 7 Service Configuration
Confidential and Proprietary Information of ZTE CORPORATION 129
1. To enter into Hybrid ACL, use command config acl
hybrid number <acl-number> in global configuration mode.
This is shown in
Table 194
TABLE 194 CONFIG ACL HYBRID COMMAND
Format Mode Function
config acl hybrid
number <acl-
number>
global config This enters into
Hybrid ACL
Result: This enters into Hybrid ACL.
2. To configure the rules of ACL, use command rule <rule-
id> {permit|deny} {< ip-protocol> | ip | tcp | udp|
arp}{<source-ipaddr wildcard>|any} [<source-port
sourceport-mask>]{<destination-ipaddr wildcard>|any}
[<dest-port destport-mask>][dscp] [fragment] [ether-
type <proto-number>] [cos][<source-vlanId>] [<source-
mac wildcard >| any] [<destination-mac wildcard>| any] in
ACL config mode. This is shown in
TABLE 195 RULE COMMAND
Format Mode Function
rule <rule-id>
{permit|deny} {<
ip-protocol> | ip | tcp
| udp|
arp}{<source-ipaddr
wildcard>|any}
[<source-port
sourceport-
mask>]{<destination-
ipaddr wildcard>|any}
[<dest-port destport-
mask>][dscp]
[fragment] [ether-
type <proto-
number>]
[cos][<source-
vlanId>] [<source-
mac wildcard >| any]
[<destination-mac
wildcard>| any]
ACL config
This enters into
ACL rules
Result: This enters into ACL rules.
E
ND OF STEPS
Hybrid ACL has been configured.
Configuring Global ACL
This topic describes the configuration of global ACL.
Result
Purpose

Table of Contents

Related product manuals