3Com Baseline 2928 PWR Plus - Flow Interval Configuration; Monitoring Port Traffic Statistics

1-1
1 Flow Interval Configuration
Overview
With the flow interval module, you can view the average receiving rate and average sending rate of a
port over the specified interval.
Monitoring Port Traffic Statistics
Setting the Traffic Statistics Generating Interval
Select Device > Flow interval from the navigation bar, and click the Interval Configuration tab to
enter the page shown in
Figure 1-1.
Figure 1-1 The page for setting the traffic statistics generating interval
Table 1-1 describes the traffic statistics generating interval configuration items.
Table 1-1 Traffic statistics generating interval configuration items
Item Remarks
Interval for generating traffic statistics Set the interval for generating port traffic statistics.
Select ports
Select ports from the chassis front panel to apply the
interval to them.
Viewing Port Traffic Statistics
Select Device > Flow interval from the navigation tree to enter the Port Traffic Statistics tab shown in
Figure 1-2. On the tab, you can view the average receiving/sending rate (in both packets per second
and bytes per second) of each port over the last interval.