3Com Baseline 2928 PWR Plus - Configuration Guidelines

1-11
Now, Switch D becomes a slave device.
3) Verify the configuration
# Display the stack topology on Switch A.
z Select IRF from the navigation tree of Switch A and click the Topology Summary tab.
z You can view the information as shown in Figure 1-11.
Figure 1-11 Verify the configuration
Configuration Guidelines
When configuring an IRF stack, note that:
1) If a device is already configured as the master device of a stack, you are not allowed to modify the
private IP address pool on the device.
2) If a device is already configured as a slave device of a stack, the Global Settings area on the slave
device is grayed out.