3-10
z If the main configuration file is corrupted or does not exist, the device cannot be rebooted with the
reboot command. In this case, you can specify a new main configuration file to reboot the device,
or you can power off the device, and then power it on, and the system will automatically use the
backup configuration file at the next startup.
z If you reboot the device when file operations are being performed, the system does not execute the
command to ensure security.
Examples
# If the configuration does not change, reboot the device.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
This command will reboot the device. Continue? [Y/N]:y
Now rebooting, please wait...
# If the configuration changes, reboot the device.
<Sysname> reboot
Start to check configuration with next startup configuration file, please wait.........DONE!
This command will reboot the device. Current configuration will be lost in next startup if
you continue. Continue? [Y/N]:y
Now rebooting, please wait...
summary
Syntax
summary
Parameters
None
Description
Use the summary command to view the summary information of the device, including the IP address of
VLAN-interface 1, and software version information.
Examples
# Display summary information of the device.
<Sysname> summary
Select menu option: Summary
IP Method: DHCP
IP address: 10.153.96.86
Subnet mask: 255.255.255.0
Default gateway: 0.0.0.0
Current boot app is: flash:/2900_release.bin
Next main boot app is: NULL
Next backup boot app is: NULL
3Com Corporation
3Com Baseline Switch 2928-PWR Plus Software Version 5.20 ESS 1101
To Next Page
Loading...
