2-7
Function menu Description User level
Event View, create, modify, and clear event entries. Configure
Log Display log information about RMON events. Configure
Energy
Saving
Energy
Saving
Display and configure the energy saving settings of
an interface.
Configure
Display and refresh SNMP configuration and
statistics information.
Monitor
Setup
Configure SNMP. Configure
Display SNMP community information. Monitor
Community
Create, modify and delete an SNMP community. Configure
Display SNMP group information. Monitor
Group
Create, modify and delete an SNMP group. Configure
Display SNMP user information. Monitor
User
Create, modify and delete an SNMP user. Configure
Display the status of the SNMP trap function and
information about target hosts.
Monitor
Trap
Enable or disable the SNMP trap function, or
create, modify and delete a target host.
Configure
Display SNMP view information. Monitor
SNMP
View
Create, modify and delete an SNMP view. Configure
Interface
Statistics
Interface
Statistics
Display and clear the statistics information of an
interface.
Configure
Select
VLAN
Select a VLAN range. Monitor
Create Create VLANs. Configure
Port Detail Display the VLAN-related details of a port. Monitor
Detail Displays the member port information of a VLAN. Monitor
Modify
VLAN
Modify the description and member ports of a
VLAN.
Configure
Modify Port Change the VLAN to which a port belongs. Configure
VLAN
Remove Remove VLANs. Configure
Summary
Display information about VLAN interfaces by
address type.
Monitor
Create
Create VLAN interfaces and configure IP
addresses for them.
Configure
Modify
Modify the IP addresses and status of VLAN
interfaces.
Configure
VLAN
Interface
Remove Remove VLAN interfaces. Configure
Summary
Display voice VLAN information globally or on a
port.
Monitor
Setup Configure the global voice VLAN. Configure
Net
work
Voice
VLAN
Port Setup Configure a voice VLAN on a port. Configure
To Next Page
Loading...
