3Com Baseline 2928 PWR Plus - Displaying Device Summary of a Stack; Logging into a Slave Device from the Master

1-5
Table 1-3 Fields of topology summary
Fields Description
Member ID
Member ID of the device in the stack:
z Value 0 indicates that the device is the master device of the stack.
z A value other than 0 indicates that the device is a slave device and the
value is the member ID of the slave device in the stack.
Role Role of the device in the stack: master or slave.
Return to
Stack configuration task list.
Displaying Device Summary of a Stack
Select IRF from the navigation tree and click the Device Summary tab to enter the page shown in
Figure 1-4. On this page, you can view interfaces and power socket layout on the panel of each stack
member by clicking the tab of the corresponding member device.
Figure 1-4 Device summary (the master device)
Return to
Stack configuration task list.
Logging Into a Slave Device From the Master
Select IRF from the navigation tree, click the Device Summary tab, and click the tab of a slave device
to enter the page shown in
Figure 1-5.
Click the Configuring the Device hyperlink, you can log on to the web interface of the slave device to
manage and maintain the slave device directly.