3Com Baseline 2928 PWR Plus - Enabling DHCP Snooping

3-4
Task Remarks
Displaying Clients'
IP-to-MAC
Bindings
Optional
Display clients' IP-to-MAC bindings recorded by DHCP snooping.
Enabling DHCP Snooping
Select Network > DHCP from the navigation tree, and then click the DHCP Snooping tab to enter the
page shown in
Figure 3-3. You can enable or disable DHCP snooping in the DHCP Snooping field.
Figure 3-3 DHCP snooping configuration page
z To enable DHCP snooping, click on the Enable radio button in the DHCP Snooping field.
z To disable DHCP snooping, click on the Disable radio button in the DHCP Snooping field.
Return to
DHCP Snooping Configuration Task List.