3Com Baseline 2928 PWR Plus - Selecting Vlans

1-5
Figure 1-4 The Create tab
Table 1-3 describes the configuration items of creating a VLAN.
Table 1-3 Configuration items of creating VLANs
Item Description
VLAN IDs IDs of the VLANs to be created
ID
Select the ID of the VLAN whose description string is to be modified.
Click the ID of the VLAN to be modified in the list in the middle of the
page.
Modify the
description
of the
selected
VLAN
Description
Set the description string of the selected VLAN.
By default, the description string of a VLAN is its VLAN ID, such as
VLAN 0001.
Return to
VLAN configuration task list (approach I).
Return to
VLAN configuration task list (approach II).
Selecting VLANs
Select Network > VLAN from the navigation tree. The Select VLAN tab is displayed by default for you
to select VLANs, as shown in
Figure 1-5.