3Com Baseline 2928 PWR Plus - Adding OUI Addresses to the OUI List

1-7
Item Description
Select Ports
Select the port on the chassis front panel.
You can select multiple ports to configure them in bulk. The
numbers of the selected ports will be displayed in the Ports
selected for voice VLAN text box.
To set the voice VLAN assignment mode of a port to automatic,
you must ensure that the link type of the port is trunk or hybrid,
and that the port does not belong to the voice VLAN.
Return to
Configuring voice VLAN on a port in automatic voice VLAN assignment mode.
Return to
Configuring voice VLAN on a port working in manual voice VLAN assignment mode.
Adding OUI Addresses to the OUI List
Select Network > Voice VLAN from the navigation tree and click the OUI Add tab on the displayed
page to enter the page shown in
Figure 1-3.
Figure 1-3 Add OUI addresses to the OUI list
Table 1-8 describes the OUI list configuration items.
Table 1-8 OUI list configuration items
Item Description
OUI Address Set the source MAC address of voice traffic.
Mask Set the mask length of the source MAC address.