1-2
Figure 1-2 Configuration restore page
z After you click the upper Browse button in this figure, the file upload dialog box appears. You can
select the .cfg file to be uploaded, and then click Apply.
z After you click the lower Browse button in this figure, the file upload dialog box appears. You can
select the .xml file to be uploaded, and then click Apply.
Save Configuration
The save configuration module provides the function to save the current configuration to the
configuration file (.cfg file or .xml file) for the next startup.
Select Device or Configuration from the navigation tree, and then click the Save tab to enter the save
configuration confirmation page, as shown in
Figure 1-3.
Figure 1-3 Save configuration confirmation
Click the Save Current Settings button to save the current configuration to the configuration file.
z Saving the configuration takes a period of time.
z The system does not support the operation of saving configuration of two or more consecutive
users. If such a case occurs, the system prompts the latter users to try later.
To Next Page
Loading...
