1-10
Item Description
ACL
Associate a basic ACL with the group to restrict the source IP address
of SNMP packets, that is, you can configure to allow or prohibit SNMP
packets with a specific source IP address, so as to restrict the
intercommunication between the NMS and the agent.
Return to
SNMPv3 configuration task list.
Configuring an SNMP User
Select Device > SNMP from the navigation tree, then click the User tab to enter the page as shown in
Figure 1-13. Click Add to enter the Add SNMP User page, as shown in Figure 1-14.
Figure 1-13 SNMP user
Figure 1-14 Create an SNMP user
Table 1-7 describes the configuration items for creating an SNMP user.
To Next Page
Loading...
