3Com Baseline 2928 PWR Plus - Configuring Traffic Mirroring and Traffic Redirecting for a Traffic Behavior

2-18
Table 2-13 Configuration items of creating a behavior
Item Description
Behavior name Specify a name for the behavior to be created.
Return to
QoS policy configuration task list.
Configuring Traffic Mirroring and Traffic Redirecting for a Traffic Behavior
Select QoS > Behavior from the navigation tree and click Port Setup to enter the port setup page for a
traffic behavior, as shown in
Figure 2-14.
Figure 2-14 Port setup page for a traffic behavior
Table 2-14 describes the traffic mirroring and traffic redirecting configuration items.
Table 2-14 Traffic mirroring and traffic redirecting configuration items
Item Description
Please select a behavior Select an existing behavior in the drop-down list.
Redirect Set the action of redirecting traffic to the specified destination port.
Please select a port
Specify the port to be configured as the destination port of traffic
mirroring or traffic directing on the chassis front panel.
Return to
QoS policy configuration task list.