3Com Baseline 2928 PWR Plus - Port Management Configuration Example

1-6
Figure 1-3 The Details tab
Port Management Configuration Example
Network requirements
As shown in Figure 1-4:
z Server A, Server B, and Server C are connected to GigabitEthernet 1/0/1, GigabitEthernet 1/0/2,
and GigabitEthernet 1/0/3 or the switch respectively. The rates of the network adapters of these
servers are all 1000 Mbps.
z The switch connects to the external network through GigabitEthernet 1/0/4 whose rate is 1000
Mbps.
z To avoid congestion at the egress port, GigabitEthernet 1/0/4, configure the auto-negotiation rate
range on GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 as 100 Mbps.
Figure 1-4 Network diagram for port rate configuration