1-5
Viewing the Operation Parameters of a Port
Select Device > Port Management from the navigation tree. The Summary tab is displayed by default.
Select the parameter you want to view by clicking the radio button before it to display the setting of this
parameter for all the ports in the lower part of the page, as shown in
Figure 1-2.
Figure 1-2 The Summary tab
Select Device > Port Management from the navigation tree, select the Details tab on the page that
appears, and then click the port whose operation parameters you want to view in the chassis front panel,
as shown in
Figure 1-3. The operation parameter settings of the selected port are displayed on the
lower part of the page; those inside the square brackets are the actual values of the selected port
To Next Page
Loading...
