3Com Baseline 2928 PWR Plus - Requesting a Local Certificate

1-13
Return to Configuration task list for requesting a certificate automatically.
Requesting a Local Certificate
Select Authentication > PKI from the navigation tree, and then select the Certificate tab to enter the
page displaying existing PKI certificates, as shown in
Figure 1-6. Click Request Cert to enter the local
certificate request page, as shown in
Figure 1-11.
Figure 1-11 Local certificate request page
Table 1-7 describes the configuration items for requesting a local certificate.
Table 1-7 Configuration items for requesting a local certificate
Item Description
Domain Name Select the PKI domain for the certificate.
Password Type the password for certificate revocation.
Enable Offline Mode
Select this check box to request a certificate in offline mode, that is, by an
out-of-band means like FTP, disk, or e-mail.
If you select the offline mode and click Apply, the offline certificate request information page appears,
as shown in
Figure 1-12. Submit the information to the CA to request a local certificate.
Figure 1-12 Offline certificate request information page
Return to
Configuration task list for requesting a certificate manually.