3Com Baseline 2928 PWR Plus - Configuring Voice VLAN on a Port

1-6
Item Description
Voice VLAN aging time
Set the voice VLAN aging timer.
The voice VLAN aging timer setting only applies to a port in
automatic voice VLAN assignment mode. The voice VLAN aging
timer starts as soon as the port is assigned to the voice VLAN. If
no voice packet has been received before the timer expires, the
port is removed from the voice VLAN.
Return to
Configuring voice VLAN on a port in automatic voice VLAN assignment mode.
Return to
Configuring voice VLAN on a port working in manual voice VLAN assignment mode.
Configuring Voice VLAN on a Port
Select Network > Voice VLAN from the navigation tree, and click the Port Setup tab on the displayed
page to enter the page shown in
Figure 1-2.
Figure 1-2 Configure voice VLAN on a port
Table 1-7 describes the configuration items of configuring voice VLAN for a port.
Table 1-7 Configuration items of configuring Voice VLAN for a port
Item Description
Voice VLAN port mode
Set the voice VLAN assignment mode of a port to:
z Auto, that is, automatic voice VLAN assignment mode
z Manual, that is, manual voice VLAN assignment mode
Voice VLAN port state
Select Enable or Disable in the drop-down list to enable or
disable the voice VLAN function on the port.
Voice VLAN ID
Set the voice VLAN ID.
This option is available when the voice VLAN port state is set to
Enable.
The device supports only one voice VLAN. Only an existing static
VLAN can be configured as the voice VLAN.