3Com Baseline 2928 PWR Plus - Displaying RMON Event Logs; RMON Configuration Example

1-13
Displaying RMON Event Logs
Select Device > RMON from the navigation tree and click the Log tab to enter the page, as shown in
Figure 1-11, which displays log information for all event entries.
Figure 1-11 Log
Return to
Display RMON running status.
RMON Configuration Example
Network requirements
As shown in Figure 1-12, Agent is connected to a remote NMS across the Internet. Create an entry in
the RMON Ethernet statistics table to gather statistics on Ethernet 1/0/1, and perform corresponding
configurations so that the system will log the event when the number of bytes received on the interface
exceed the specified threshold.
Figure 1-12 Network diagram for RMON
Configuration procedure
# Configure RMON to gather statistics for interface Ethernet 1/0/1.
z Select Device > RMON from the navigation tree to enter the page of the Statistics tab. Click Add
and perform the following configurations, as shown in
Figure 1-13.