About This Manual
Organization
3Com Baseline Switch 2900 Family User Guide is organized as follows:
Part Contents
1 Overview Perform overview of 3Com baseline switch 2900 family.
2 Configuration Wizard Perform quick configuration of the device.
3 IRF
Configure global parameters and stack ports, and display global
settings, port settings, and topology summary of a stack.
4 Summary
Display the basic system information, port information, system
resource state, and recent system operation logs.
5 Device Basic Information
Display and configure the system name and idle timeout period for
logged-in users.
6 System Time Display and configure the system date and time.
7 Log Management
Clear system logs, display and configure the loghost, display and
refresh system logs.
Display and configure the buffer capacity, and interval for refreshes
system logs.
8 Configuration
Management
Back up the configuration file or upload the configuration file to be
used at the next startup from the host of the current user to the device.
Save the current configuration to the configuration file to be used at
the next startup.
Restore the factory default settings.
9 Device Maintenance
Configure to upload upgrade file from local host, and upgrade the
system software.
Configure to reboot the device.
Display the electronic label of the device.
Generate diagnostic information file, and view or save the file to local
host.
10 File Management
Manage files on the device, such as displaying the file list,
downloading a file, uploading a file, and removing a file.
11 Port Management
Create, modify, delete, and enable/disable a port, and clear port
statistics.
12 Port Mirroring Create, remove, and configure a port mirroring group.
13 User Management
Create, modify, and remove an FTP or Telnet user, and display the
brief information of FTP and Telnet users.
14 Loopback Test Perform loopback tests on Ethernet interfaces.
15 VCT Check the status of the cables connected to Ethernet ports.
16 Flow Interval
Set an interval for collecting traffic statistics on interfaces, and display
the average rate at which the interface receives and sends packets
within a specified time interval.
17 Storm Constrain
Display, create, modify, and remove the port traffic threshold, and
display or set the interval for collecting storm constrain statistics.
To Next Page
Loading...
