3Com Baseline 2928 PWR Plus - Configuring Classifier-Behavior Associations for the Policy; Creating a Policy

2-20
Table 2-15 Configuration items of configuring other actions for a traffic behavior
Item Description
Please select a behavior Select an existing behavior in the drop-down list.
Filter
Configure the packet filtering action.
After selecting the Filter option, select one item in the following
drop-down list:
z Permit: Forwards the packet.
z Deny: Drops the packet.
z Not Set: Cancels the packet filtering action.
Return to
QoS policy configuration task list.
Creating a Policy
Select QoS > QoS Policy from the navigation tree and click Create to enter the page for creating a
policy, as shown in
Figure 2-16.
Figure 2-16 The page for creating a policy
Table 2-16 describes the configuration items of creating a policy.
Table 2-16 Configuration items of creating a policy
Item Description
Policy Name Specify a name for the policy to be created.
Return to
QoS policy configuration task list.
Configuring Classifier-Behavior Associations for the Policy
Select QoS > QoS Policy from the navigation tree and click Setup to enter the page for setting a policy,
as shown in
Figure 2-17.