3Com Baseline 2928 PWR Plus - Applying a Policy to a Port

2-21
Figure 2-17 The page for setting a policy
Table 2-17 describes the configuration items of configuring classifier-behavior associations for the
policy.
Table 2-17 Configuration items of configuring classifier-behavior associations for the policy
Item Description
Please select a policy Select a created policy in the drop-down list.
Classifier Name
Select an existing classifier in the drop-down list.
The classifiers available for selection are created on the page
for creating a classifier.
Behavior Name
Select an existing behavior in the drop-down list.
The behaviors available for selection are created on the page
for creating a behavior.
Return to
QoS policy configuration task list.
Applying a Policy to a Port
Select QoS > Port Policy from the navigation tree and click Setup to enter the page for applying a
policy to a port, as shown in
Figure 2-18.