3Com Baseline 2928 PWR Plus - Configuring a Rule for an Advanced Ipv4 ACL

1-7
Item Description
Time Range
Select the time range during which the rule takes effect.
Available time ranges are those that have been configured.
Return to
IPv4 ACL configuration task list.
Configuring a Rule for an Advanced IPv4 ACL
Select QoS > ACL IPv4 from the navigation tree and then select the Advance Setup tab to enter the
rule configuration page for an advanced IPv4 ACL, as shown in
Figure 1-4.
Figure 1-4 The page for configuring an advanced IPv4 ACL