3Com Baseline 2928 PWR Plus - Configuring MSTP Globally

1-16
Figure 1-7 Configure an MST region
Table 1-8 describes the configuration items of configuring an MST region.
Table 1-8 Configuration items of configuring an MST region
Item Description
Region Name
MST region name
The MST region name is the bridge MAC address of the
device by default.
Revision Level Revision level of the MST region
Instance ID
Manual
VLAN ID
Manually add VLAN-to-MSTI mappings. Click Apply to add
the VLAN-to-MSTI mapping entries to the list below.
Modulo Modulo Value
The device automatically maps 4094 VLANs to the
corresponding MSTIs based on the modulo value.
Return to
MSTP configuration task list.
Configuring MSTP Globally
Select Network > MSTP from the navigation tree, and then click Global to enter the page for
configuring MSTP globally, as shown in
Figure 1-8.