3-1
3 ACL/QoS Configuration Examples
ACL/QoS Configuration Example
Network requirements
As shown in Figure 3-1, in the network, the FTP server at IP address 10.1.1.1/24 is connected to the
Switch, and the clients access the FTP server through GigabitEthernet 1/0/1 of the Switch.
Configure an ACL and a QoS policy as follows to prevent the hosts from accessing the FTP server from
8:00 to 18:00 every day:
1) Create an ACL to prohibit the hosts from accessing the FTP server from 8:00 to 18:00 every day.
2) Configure a QoS policy to drop the packets matching the ACL.
3) Apply the QoS policy in the inbound direction of GigabitEthernet 1/0/1.
Figure 3-1 Network diagram for ACL/QoS configuration
Configuration procedure
1) Configure the time range
# Define a time range covering the time range from 8:00 to 18:00 every day.
z Select QoS > Time Range from the navigation tree and click Create. Perform configuration as
shown in
Figure 3-2.
To Next Page
Loading...
