EasyManua.ls Logo

3Com Baseline 2928 PWR Plus - Quit; Reboot

3Com Baseline 2928 PWR Plus
505 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3-9
round-trip min/avg/max = 1/41/205 ms
The above information shows that IP address 1.1.2.2 is reachable and the echo replies are all returned
from the destination. The minimum, average, and maximum roundtrip intervals are 1 millisecond, 41
milliseconds, and 205 milliseconds respectively.
quit
Syntax
quit
Parameters
None
Description
Use the quit command to log out of the system.
Examples
# Log out of the system.
<Sysname> quit
******************************************************************************
* Copyright (c) 2004-2009 3Com Corp. and its licensors. All rights reserved. *
* This software is protected by copyright law and international treaties. *
* Without the prior written permission of 3Com Corporation and its licensors,*
* any reproduction republication, redistribution, decompiling, reverse *
* engineering is strictly prohibited. Any unauthorized use of this software *
* or any portion of it may result in severe civil and criminal penalties, and*
* will be prosecuted to the maximum extent possible under the applicable law.*
******************************************************************************
User interface aux0 is available.
Please press ENTER.
reboot
Syntax
reboot
Parameters
None
Description
Use the reboot command to reboot the device and run the main configuration file.
Note that:
z Use the command with caution because reboot results in service interruption.

Table of Contents

Other manuals for 3Com Baseline 2928 PWR Plus

Related product manuals