EasyManua.ls Logo

3Com Baseline 2928 PWR Plus - Configuring a Voice VLAN on a Port in Manual Voice VLAN Assignment Mode

3Com Baseline 2928 PWR Plus
505 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-13
Figure 1-11 Current voice VLAN information
Configuring a Voice VLAN on a Port in Manual Voice VLAN Assignment Mode
Network requirements
z Configure VLAN 2 as a voice VLAN that carries only voice traffic.
z The IP phone connected to hybrid port GigabitEthernet 1/0/1 sends untagged voice traffic.
z GigabitEthernet 1/0/1 operates in manual voice VLAN assignment mode and allows voice packets
whose source MAC addresses match the OUI addresses specified by OUI address
0011-2200-0000 and mask ffff-ff00-0000 to pass through. The description of the OUI address entry
is test.
Figure 1-12 Network diagram for voice VLAN configuration on a port in manual voice VLAN
assignment mode
Switch A Switch B
GE1/0/3
GE1/0/1
VLAN 2
VLAN 2
010-1001
OUI: 0011-2200-0000
Mask: ffff-ff00-0000
0755-2002
Internet
Configuration procedure
# Create VLAN 2.
z Select Network > VLAN from the navigation tree, and click Create on the displayed page to enter
the page shown in
Figure 1-13.

Table of Contents

Other manuals for 3Com Baseline 2928 PWR Plus

Related product manuals