1-12
Figure 1-9 Add OUI addresses to the OUI list
z Type in OUI address 0011-2200-0000.
z Select FFFF-FF00-0000 in the Mask drop-down list.
z Type in description string test.
z Click Apply.
Verify the configuration
z When the configurations described above are completed, the OUI Summary tab is displayed by
default, as shown in
Figure 1-10. You can view the information about the newly-added OUI
address.
Figure 1-10 Current OUI list of the device
z Click the Summary tab to enter the page shown in Figure 1-11, where you can view the current
voice VLAN information.
To Next Page
Loading...
