3Com Baseline 2928 PWR Plus - Configuring Queue Scheduling on a Port

2-22
Figure 2-18 The page for applying a policy to a port
Table 2-18 describes the configuration items of applying a policy to a port.
Table 2-18 Configuration items of applying a policy to a port
Item Description
Please select a policy Select a created policy in the drop-down list.
Direction
Set the direction in which the policy is to be applied.
Inbound: Applies the policy to the incoming packets of the
specified ports.
Please select port(s)
Click to select ports to which the QoS policy is to be applied on the
chassis front panel.
Return to
QoS policy configuration task list.
Configuring Queue Scheduling on a Port
Select QoS > Queue from the navigation tree and click Setup to enter the queue scheduling
configuration page, as shown in
Figure 2-19.
Figure 2-19 The page for configuring queue scheduling