1-5
Return to IPv4 ACL configuration task list.
Creating an IPv4 ACL
Select QoS > ACL IPv4 from the navigation tree and then select the Create tab to enter the IPv4 ACL
configuration page, as shown in
Figure 1-2.
Figure 1-2 The page for creating an IPv4 ACL
Table 1-5 describes the configuration items for creating an IPv4 ACL.
Table 1-5 IPv4 ACL configuration items
Item Description
ACL Number
Set the number of the IPv4 ACL.
Match Order
Set the match order of the ACL. Available values are:
z Config: Packets are compared against ACL rules in the order that the
rules are configured.
z Auto: Packets are compared against ACL rules in the depth-first
match order.
Return to
IPv4 ACL configuration task list.
Configuring a Rule for a Basic IPv4 ACL
Select QoS > ACL IPv4 from the navigation tree and then select the Basic Setup tab to enter the rule
configuration page for a basic IPv4 ACL, as shown in
Figure 1-3.
To Next Page
Loading...
