1-2
Figure 1-1 The Storm Constrain tab
z The traffic statistics generating interval set here is the interval used by the storm constrain function
for measuring traffic against the traffic thresholds. It is different from the interval set in the flow
interval module, which is used for measuring the average traffic sending and receiving rates over a
specific interval.
z For network stability sake, set the traffic statistics generating interval for the storm constrain
function to the default or a greater value.
Configuring Storm Constrain
Select Device > Storm Constrain from the navigation tree to enter the page shown in Figure 1-1. In the
Port Storm Constrain area, the configured port storm constrain settings are displayed. Click Add to
enter the page for adding port storm constrain configuration, as shown in
Figure 1-2.
To Next Page
Loading...
