1-25
Figure 1-13 Configure an MST region
z Set the region name to example.
z Set the revision level to 0.
z Select the Manual radio button.
z Select 1 in the Instance ID drop-down list.
z Set the VLAN ID to 10.
z Click Apply to map VLAN 10 to MSTI 1 and add the VLAN-to-MSTI mapping entry to the
VLAN-to-MSTI mapping list.
z Repeat the steps above to map VLAN 20 to MSTI 2 and VLAN 30 to MSTI 3 and add the
VLAN-to-MSTI mapping entries to the VLAN-to-MSTI mapping list.
z Click Activate.
# Configure MSTP globally.
z Select Network > MSTP from the navigation tree, and then click Global to enter the page for
configuring MSTP globally, as shown in
Figure 1-14.
To Next Page
Loading...
