3Com Baseline 2928 PWR Plus - Page 277

1-26
Figure 1-24 The page for configuring ports
z Select Trunk in the Link Type drop-down list.
z Click to select port GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 from the chassis front panel.
z Click Apply.
# Configure the voice VLAN function on the two ports.
z Select Network > Voice VLAN from the navigation bar and click the Port Setup tab to enter the
page for configuring the voice VLAN function on ports, as shown in
Figure 1-25.